R&S SMJ100A, Operating Manual

Page: 768 / 874

Remote Control Commands
R&S
®
SMJ100A
752 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:LIST:DEXChange:MODE <Mode>
Selects if list mode lists should be imported or exported. Depending on the selection
here, the file select command defines either the source or the destination for list mode
lists and ASCII files.
Parameters:
<Mode> IMPort | EXPort
*RST:
IMPort
Example: LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL 'D:\user\list.csv'
selects that ASCII file
list.csv
is imported.
LIST:DEXC:SEL 'D:\user\list_imp'
selects that the ASCII file
list.csv
is imported into list mode
list
list_imp
.
Manual operation: See "Mode - List Mode" on page 279
[:SOURce<hw>]:LIST:DEXChange:SELect <Filename>
Selects the list mode list to be imported or exported.
The list mode files are stored with the fixed file extensions
*.lsw
in a directory of the
user's choice. The directory applicable to the commands is defined with the command
MMEMory:CDIR
. A path can also be specified in command
SOUR:LIST:DEXC:SEL
, in
which case the files are stored or loaded in the specified directory.
Parameters:
<Filename> <list_name>
Example: LIST:DEXC:MODE IMP
selects that ASCII files with frequency and level value pairs are
imported and transferred into list mode lists.
LIST:DEXC:AFIL:SEL ‘D:\user\list.csv'
selects that ASCII file
list.csv
is imported.
LIST:DEXC:SEL ‘D:\user\list_imp'
selects that the ASCII file
list.csv
is imported into list mode
list
list_imp
.
Manual operation: See "Select Destination / Source - List Mode" on page 280
[:SOURce<hw>]:LIST:DWELl <Dwell>
Sets the dwell time. The R&S SMJ generates the signal with the frequency / power
value pairs of each list entry for that particular period.
SOURce Subsystem