R&S SMJ100A, Operating Manual

Page: 637 / 874

Remote Control Commands
R&S
®
SMJ100A
621 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Clock> float
Increment: 1E-3
*RST:
max SampleRate
Example: BB:ARB:WSEG:CONF:CLOC:MODE USER
selects Clock Mode User.
BB:ARB:WSEG:CONF:CLOC 50MHz
defines a clock rate of 50 MHz.
Manual operation: See "User Clock Rate" on page 404
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:CLOCk:MODE <Mode>
Selects the clock rate mode for the multi segment waveform.
Parameters:
<Mode> UNCHanged | HIGHest | USER
UNCHanged
The segments are output with the clock rate defined in the wave-
form file.
HIGHest
The segments are output at the highest available clock rate.
USER
The segments are output with the clock rate defined with com-
mand
[:SOURce<hw>]:BB:ARBitrary:WSEGment:
CONFigure:CLOCk
*RST: UNCHanged
Example: BB:ARB:WSEG:CONF:CLOC:MODE UNCH
selects clock mode unchanged. The segments are output with
the clock rate defined in the waveform file.
Manual operation: See "Clock" on page 403
[:SOURce<hw>]:BB:ARBitrary:WSEGment:CONFigure:COMMent <Comment>
This command enters a comment for the configuration file. The configuration file must
be specified with command
:BB:ARB:WSEG:CONF:SEL
.
Parameters:
<Comment> string
Example: BB:ARB:WSEG:CONF:COMM <3gpp_up>
enters comment "3gpp_up".
Manual operation: See "Comment" on page 405
SOURce Subsystem