Manual Operation
R&S
®
SMJ100A
108
Operating Manual 1403.7458.32 ─ 14
To increase readability, the bits are displayed in groups of four. The current cursor
position, the length of the list and the list file name are displayed above the list. The
offset starts with the value 0 which corresponds to the bit position on the left side of
the first row, i.e. the beginning of the list. On the left edge of the editor, the last
three offset positions are specified at the beginning of the row.
2. Use the numeric keys to enter the values 0 or 1.
An existing list can be edited in the insert or overwrite mode. Use the INSERT key
to toggle between these two modes.
3. To
delete
a value, use the arrow keys to mark the bit that follows the value to be
deleted.
Press the INSERT key to activate the insert mode. Values cannot be deleted in the
overwrite mode.
Press the BACKSPACE key.
The value before the marked bit is deleted.
4. To
select a bit position
, select the "GoTo" button and press the ENTER key.
Enter the bit position in the "GoTo Offset" entry field by means of the numeric keys
and confirm the entry.
The cursor marks the bit at the selected position.
5. To
copy and paste
any range of bits at any position in the list:
a) Use the the arrow keys to mark the start bit of the selection.
b) Select the "Start Select" button and use the the arrow keys to mark the selec-
tion.
c) Click the "Copy" button.
d) Navigate to the insert possition and select "Paste".
The selected and copied bits are pasted after the selected position.
6. To
display and edit
the values in hexadecimal form, select the "Hex" button.
Each four bits are displayed as a hexadecimal value: To increase readability, the
hexadecimal values in turn are displayed in pairs of two. The hex functions are
automatically assigned to the numeric keys at the front panel.
7. To
save
the data list, press the ESC key.
The list is saved automatically when the dialog is closed.
Creating a new data list
1. To create an empty data list, in the individual menu select "List Management >
Select Data List to Edit... > Create Data List" and enter the file name of the new
data list.
2. To open the data list for editing, select the associated button "Edit Data List..." in
the individual menu.
Editors
Summary of Contents for SMJ100A
