R&S SMJ100A, Operating Manual

Page: 616 / 874

Remote Control Commands
R&S
®
SMJ100A
600 Operating Manual 1403.7458.32 ─ 14
Example: BB:ARB:MCAR:CARR15:FILE "D:\user\IQ_wcdma"
selects file
IQ_wcdma
. The data of the file is modulated onto
carrier 15.
Manual operation: See "File" on page 423
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:FREQuency <Frequency>
Sets or indicates the carrier frequency, depending on the selected carrier frequency
mode.
The carrier frequnecy can be set in "Arbitrary Carrier frequency" mode. For "Equidis-
tant Carrier Spacing", the carrier spacing is determined automatically.
Parameters:
<Frequency> integer
Vvalue range depends on the max bandwidth, see data sheet
Range:
-40E6 to 40E6
*RST: 0
Example: BB:ARB:MCAR:CARR:MODE ARB
activates ARB multi carrier mode.
BB:ARB:MCAR:CARR:FREQ 5.0
sets 5.0 MHz carrier frequency.
Manual operation: See "Carrier Freq [MHz]" on page 422
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:PHASe <Phase>
The command sets the start phase of the selected carrier.
The phase settings are only valid if optimization of the crest factor is disabled
(
:SOURce:BB:ARB:MCARrier:CFACtor:MODE OFF
).
Parameters:
<Phase> float
Range:
0 to 359.99
Increment: 0.01
*RST:
0
Default unit: DEG
Example: BB:ARB:MCAR:CARR15:PHAS 90 DEG
sets a start phase of 90° for carrier 15.
Manual operation: See "Phase" on page 422
[:SOURce<hw>]:BB:ARBitrary:MCARrier:CARRier<ch>:POWer <Power>
The command sets the gain of the selected carrier.
SOURce Subsystem