R&S SMJ100A, Operating Manual

Page: 772 / 874

Remote Control Commands
R&S
®
SMJ100A
756 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Mode> AUTO | STEP
AUTO
Each trigger event triggers a complete list cycle. Possible trigger
settings for
:LIST:TRIGger:SOURce
are
AUTO
,
SINGle
and
EXT
.
STEP
Each trigger event triggers only one step in the list processing
cycle. The list is processed in ascending order.
Possible trigger settings for
:LIST:TRIGger:SOURce
are
SINGle
and
EXT
*RST: AUTO
Example: LIST:MODE STEP
selects step-by-step processing of the list.
Manual operation: See "Mode - List Mode" on page 274
[:SOURce<hw>]:LIST:POWer <Power>
Fills the
Level
part of the selected list with data.
*RST
does not affect data lists.
Parameters:
<Power> <Power#1>{, <Power#2>, ...} | block data
The data can be given either as a list of numbers (list can be of
any length and list entries must be separated by commas) or as
binary block data. When block data is transferred, 8 bytes are
always interpreted as a floating-point number with double accu-
racy (see
:FORMat[:DATA]
on page 531).
Range: Minimum level to Maximum level
Default unit: dBm
Example: LIST:SEL 'D:\user\list3'
selects
list3
for editing. The R&S SMJ generates a new file
automatically, if it does not exist yet.
LIST:POW 0dBm, 2dBm, 2dBm, 3dBm,..
specifies the level values in
list3
. The number of level values
must correspond to the number of frequency values. The previ-
ous data is overwritten.
Manual operation: See "Edit List Mode Data... - List Mode" on page 277
[:SOURce<hw>]:LIST:POWer:POINts?
Queries the length (in points) of the LEVel part of the selected list.
SOURce Subsystem