R&S SMJ100A, Operating Manual

Page: 839 / 874

Hardware Interfaces
R&S
®
SMJ100A
823 Operating Manual 1403.7458.32 ─ 14
Annex
A Hardware Interfaces
This section covers hardware related topics, like pin assignment of the GPIB bus inter-
face, monitor and AUX I/O connectors.
The remote control interfaces are described in detailes in Chapter 6, "Remote Control
Basics" , on page 439.
All other interfaces are described in Chapter 2.1, "Front Panel Tour" , on page 19 and
Chapter 2.2, "Rear Panel Tour" , on page 27.
For specifications refer to the data sheet.
A.1 GPIB Bus Interface
Pin assignment
Figure A-1: Pin assignment of GPIB bus interface
Bus lines
●
Data bus with 8 lines D0 to D7:
The transmission is bit-parallel and byte-serial in the ASCII/ISO code. D0 is the
least significant bit, D7 the most significant bit.
●
Control bus with five lines:
GPIB Bus Interface