R&S SMJ100A, Operating Manual

Page: 425 / 874

Instrument Function
R&S
®
SMJ100A
409 Operating Manual 1403.7458.32 ─ 14
Info ← Sequencing Play List
Opens a dialog with detailed information about the currently selected waveform.
See also "Waveform Info" on page 375.
Remote command:
n.a.
Append
Inserts a new row at the end of the sequencing play list table.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:SELect
on page 628
[:SOURce<hw>]:BB:ARBitrary:WSEGment:SEQuence:APPend
on page 628
Delete
Deletes the selected row.
Remote command:
n.a.
Shift Id# Up/Down
Shifts the selected row up and down.
Remote command:
n.a.
Sequencing Graphic
Displays the play list graph according to the current configuration.
The graph shows the segment sequence, the segment number and the number of
times, the segment is repeated; considered are only the active segments.
Remote command:
n.a.
New Sequencing List
Opens the "Select Sequencing List" dialog to enter the name of the new file.
Remote command:
n.a.
Load Sequencing List
Opens the "Select Sequencing List" dialog to select an existing play list file.
Remote command:
n.a.
Save Sequencing List
Saves the current entries of the table in a play list file.
The default file name of the play list file is the same as the multi segment waveform file
name, but it can be changed.
Play list files have the file extension
*.wvs
.
Remote command:
n.a.
Baseband Signal - Baseband Block