R&S SMJ100A, Operating Manual

Page: 391 / 874

Instrument Function
R&S
®
SMJ100A
375 Operating Manual 1403.7458.32 ─ 14
The files last used are listed in the "Recent Data Sets" section. The directory can be
selected from the center left section. All waveform files (file extension
*.wv
) available
from the selected directory are listed on the right side. The file info (tag contents and
multi segment state) for the selected file is displayed below the file section.
The "Select..." button selects the marked file. This file is loaded when the ARB modula-
tion is enabled ("State On").
The "File Manager..." button leads to the file manager.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:WAVeform:SELect
on page 617
Waveform Info
Opens a dialog with detailed information about the currently selected waveform.
The waveform information displayed in this dialog depends on whether the selected
waveform file is a multi segment one or not. All parameters are read-only.
For non-multi segment waveform files, the values of the settings can be queried by
means of the Tag commands (see
Chapter 7.4, "Waveform and List Format" ,
on page 490).
Remote command:
n.a.
Baseband Signal - Baseband Block