R&S SMJ100A, Operating Manual

Page: 36 / 874

Preparing for Use
R&S
®
SMJ100A
20 Operating Manual 1403.7458.32 ─ 14
2.1.1 Utility Keys
The keys to the left of the display cause the R&S SMJ to return to a definite instrument
state and provide information on the instrument and assistance.
For more information refer to chapter "Instrument Settings".
PRESET
Sets the instrument to a defined state (see Chapter 2.3.5.4, "Default Settings" ,
on page 37).
LOCAL
Switches from remote control to local (manual) control.
SETUP
Opens the "Setup" dialog for configuring presettings.
For more information, see Chapter 5.2.3, "General Configuration of Instrument - Setup
Key" , on page 129.
HCOPY
Opens the "Hardcopy" menu for configuring and starting printing.
For more information, see Chapter 5.2.5, "Generating a Hard Copy of the Display" ,
on page 154.
INFO
Displays status messages, error messages and warnings.
HELP
Displays context-sensitive help text.
2.1.2 Standby LEDs and Standby Key
The standby LEDs and the ON/STANDBY key are located in the bottom left corner of
the front panel.
The ON/STANDBY key toggles the instrument between standby and ready state (indi-
cated by the standby LEDs).
The standby LEDs indicate the instrument states as follow:
●
the green LED (left) is on when the instrument is ready for operation,
●
the yellow LED (right) is on in the standby mode.
Front Panel Tour