Instrument Function
R&S
®
SMJ100A
179
Operating Manual 1403.7458.32 ─ 14
5.3.3.6
Power Spectrum
With the spectrum display, the signal spectrum is calculated from the I/Q signal by
means of Fast Fourier Transform (FFT).
The power density over frequency is displayed. The power density is plotted on the Y
axis, and the frequency is plotted symmetrically on the X axis (-sampling rate/2 to
+sampling rate/2). FFT Points indicates the number of I/Q value pairs which are used
for calculating a (part-)FFT. AVG indicates the number of subspectra used for averag-
ing. The recording depth is 8kSamples.
This signal is picked off at the output of the baseband main module ("Impairment" func-
tion block), i.e. contained in the displayed signal is:
●
impairment of the signal as defined by the user and the addition of noise.
The spectrum display of the output signal is particularly suitable for checking multi car-
rier signals.
Graphical Display - Graphics
Summary of Contents for SMJ100A
