R&S SMJ100A, Operating Manual

Page: 626 / 874

Remote Control Commands
R&S
®
SMJ100A
610 Operating Manual 1403.7458.32 ─ 14
Manual operation: See "Save/Recall Frame" on page 412
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:LOAD <Filename>
Loads the settings file. If a settings file with the specified name does not yet exist, it is
created. The file extension may be omitted. Only files with the file extension
*.arb_multcarr
will be loaded or created.
Setting parameters:
<Filename> string
Example: BB:ARB:MCAR:SETT:LOAD 'D:\user\new'
creates settings file
new.arb_multcarr
.
Usage: Setting only
Manual operation: See "Save/Recall Frame" on page 412
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe <Filename>
The command stores the current settings of submenu "Multi Carrier" in a file in the
specified directory. The file extension may be omitted, the files are stored with the file
extension
*.arb_multcarr
.
Setting parameters:
<Filename> string
Example: BB:ARB:MCAR:SETT:STOR 'D:\user\mcarr2'
stores settings file
mcarr2.arb_multcarr
in the default direc-
tory.
Usage: Setting only
Manual operation: See "Save/Recall Frame" on page 412
[:SOURce<hw>]:BB:ARBitrary:MCARrier:SETTing:STORe:FAST <Fast>
Determines whether the instrument performs an absolute or a differential storing of the
settings.
Enable this function to accelerate the saving process by saving only the settings with
values different to the default ones.
Note: This function is not affected by the "Preset" function.
Parameters:
<Fast> 0 | 1 | OFF | ON
*RST:
1
Manual operation: See "Fast Save" on page 160
SOURce Subsystem