R&S SMJ100A, Operating Manual

Page: 585 / 874

Remote Control Commands
R&S
®
SMJ100A
569 Operating Manual 1403.7458.32 ─ 14
The returned value reports the sensitivity in V/100%.
Return values:
<Sensitivity> float
Increment: 0.01
Example: AM:BBAN:SENS?
queries the input sensitivity for the BB-AM modulation signal at
the I IN input.
Response: 0.25
the input sensitivity is 0.25 V / 100 % depth
Usage: Query only
Manual operation: See "AM Sensitivity" on page 245
[:SOURce<hw>]:AM:BBANd[:STATe] <State>
Activates the broadband amplitude modulation.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: AM:BBAN ON
activates BB-AM modulation.
Manual operation: See "State" on page 245
[:SOURce<hw>]:AM[:DEPTh] <Depth>
Sets the modulation depth of the amplitude modulation signal in percent.
Parameters:
<Depth> float
Range:
0 to 100
Increment: See data sheet
*RST:
30
Example: AM 15PCT
sets the 15% AM modulation depth
Manual operation: See "AM Depth" on page 243
[:SOURce<hw>]:AM:EXTernal:COUPling <Coupling>
Selects the coupling mode for the external amplitude modulation signal.
SOURce Subsystem