R&S SMJ100A, Operating Manual

Page: 56 / 874

Preparing for Use
R&S
®
SMJ100A
40 Operating Manual 1403.7458.32 ─ 14
●
Printer for printing out measurement results
●
Power sensors, e.g. of the NRP Zxy family
Installing USB devices is easy under Windows, because all USB devices are
plug&play. After a device is connected to the USB interface, the operating system
automatically searches for a suitable device driver.
If Windows does not find a suitable driver, it will prompt you to specify a directory that
contains the driver software. If the driver software is on a CD, connect a USB CD-ROM
drive to the instrument before proceeding.
When a USB device is subsequently disconnected from the R&S SMJ, Windows imme-
diately detects the change in hardware configuration and deactivates the correspond-
ing driver.
All USB devices can be connected to or disconnected from the instrument during oper-
ation.
Connecting a memory stick or CD-ROM drive
If installation of a memory stick or CD-ROM drive is successful, Windows informs you
that the device is ready to use. The device is made available as a new drive and is dis-
played in Windows Explorer. The name of the drive depends on the manufacturer.
Connecting a keyboard
The keyboard is detected automatically when it is connected. The default input lan-
guage is English – US.
Select "Start > Control Panel > Clock, Language, and Region > Change keyboards or
other input methods" to configure the keyboard properties. To access the Windows
operating system, press the Windows key on the external keyboard.
Connecting a mouse
The mouse is detected automatically when it is connected.
Select "Start > Control Panel > Devices and Printers > Mouse" to configure the mouse
properties. To access the Windows operating system, press the Windows key on the
external keyboard.
Connecting a printer
When printing a file, the instrument checks whether a printer is connected and turned
on and whether the appropriate printer driver is installed. If required, printer driver
installation is initiated. A printer driver needs to be installed only once.
To install a printer, select "Start > Control Panel > Devices and Printers > Add a
printer". To access the Windows operating system, press the Windows key on the
external keyboard.
You can load updated and improved driver versions or new drivers from an installation
disk, USB memory stick or another external storage medium. If the instrument is inte-
grated in a network, you can also install driver data stored in a network directory.
Connecting External Accessories