R&S SMJ100A, Operating Manual

Page: 109 / 874

Manual Operation
R&S
®
SMJ100A
93 Operating Manual 1403.7458.32 ─ 14
This button is available only if the history of the messages is displayed.
Remote command:
:SYSTem:ERRor:ALL?
on page 792
Each time a
SYST:ERR:ALL?
query is sent, the error queue is returned and at the
same time cleared.
History
Calls the list of all messages that have occurred since instrument switch-on. The most
recent messages are displayed at the top of the list. When the button is pressed again,
the list of current messages is displayed.
Remote command:
:SYSTem:ERRor[:NEXT]?
on page 794 or
:STATus:QUEue[:NEXT]?
on page 791
Each time a
SYST:ERR?
or
STAT:QUE?
query is sent, the oldest entry in the error
queue is returned and at the same time cleared in the list.
4.2.4 Block Diagram
The block diagram shows provided options, signal configuration and the currently
selected signal flow of the generator with inputs and outputs used. Signal generation
can be completely operated from the block diagram. The highlighted function block can
be directly switched on and off with the TOGGLE ON/OFF (CTRL+T) key. Pressing the
Enter opens the associated setting menu.
Figure 4-2: Block diagram of the R&S SMJ
4.2.4.1 Function Blocks in the Block Diagram
Each block represents a function of signal generation. The function is indicated in the
headline of the block. In the check box, the respective function can be quickly activa-
Display