R&S SMJ100A, Operating Manual

Page: 713 / 874

Remote Control Commands
R&S
®
SMJ100A
697 Operating Manual 1403.7458.32 ─ 14
:SOURce1:BB:PROGress:MCODer?
// 25 (task in progress)
// :SOURce1:BB:PROGress:MCODer:DM:FILTer?
// 100
[:SOURce<hw>]:BB:PROGress:MCODer?
........................................................................697
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?
..........................................697
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?
.......................................697
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?
....................................................... 697
[:SOURce<hw>]:BB:PROGress:MCODer?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:MCARrier?
[:SOURce<hw>]:BB:PROGress:MCODer:ARBitrary:WSEGment?
Queries the status of an initiated process, like for example the calculation of a signal in
accordance to a digital standard, or the calculation of a multi carrier or multi segment
waveform file.
Return values:
<WSegment> integer
Indicates the task progress in percent
Range:
0 to 100
*RST: 100
Example: see Example "Querying the status of the Create Waveform file
process" on page 696
Usage: Query only
[:SOURce<hw>]:BB:PROGress:MCODer:DM:FILTer?
Queries the status of an applied offline filtering, like for example during the calculation
of a waveform and a multi carrier waveform file.
Return values:
<Filter> integer
Indicates the task progress in percent
Range:
0 to 100
*RST: 100
Example: see Example "Querying the status of the Create Waveform file
process" on page 696
Usage: Query only
7.16.4 SOURce:CORRection Subsystem
The output level is corrected in the
CORRection
subsystem. Correction is performed
by user-defined table values being added to the output level for the respective RF fre-
quency. In the R&S
SMJ, this subsystem is used to select, transfer and activate user
correction tables.
SOURce Subsystem