R&S SMJ100A, Operating Manual

Page: 771 / 874

Remote Control Commands
R&S
®
SMJ100A
755 Operating Manual 1403.7458.32 ─ 14
Parameters:
<Start> integer
Range:
0 to list length
*RST: 0
Example: LIST:SEL 'D:\user\list3'
selects
list3
for use in List mode.
LIST:IND:STAR 25
sets 25 as start index of the index range.
LIST:IND:STOP 49
sets 49 as stop index of the index range.
FREQ:MODE LIST
activates List mode. The frequency/level value pairs from index
25 to index 49 in list3 are processed. All other entries of the list
are ignored.
Manual operation: See "List Range In - List Mode" on page 278
[:SOURce<hw>]:LIST:INDex:STOP <Stop>
Sets the stop index of the index range which defines a subgroup of frequency/level
value pairs in the current list. Only the values in the set index range
(
:LIST:INDex:STARt ... :LIST:INDex:STOP
) are processed in list mode.
Parameters:
<Stop> integer
Range:
0 to list length
*RST: 0
Example: see
[:SOURce<hw>]:LIST:INDex:STARt
on page 754
Manual operation: See "List Range In - List Mode" on page 278
[:SOURce<hw>]:LIST:LEARn
Learns the selected list to determine the hardware setting for all list entries. The results
are saved with the list. When the list is activated the first time, these settings are calcu-
lated automatically.
Example: LIST:SEL 'D:\user\list3'
selects list file. The file is created if it does not yet exist.
LIST:LEAR
starts learning of the hardware setting for
list3
and stores the
setting.
Usage: Event
Manual operation: See "Learn List Mode Data... - List Mode" on page 276
[:SOURce<hw>]:LIST:MODE <Mode>
Selects how the list is to be processed (similar to
SOURce:SWEep:MODE
).
SOURce Subsystem