Remote Control Commands
R&S
®
SMJ100A
754
Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:LIST:FREQuency:POINts?
The command queries the length (in points) of the
FREQuency
component of the
selected list.
Return values:
<Points>
integer
Range:
0 to INT_MAX
*RST:
0
Example:
LIST:SEL 'D:\user\list3'
selects
list3
for editing. The R&S
SMJ creates a new file auto-
matically, if it does not exist yet.
LIST:FREQ:POIN?
queries the number of frequency values in the list
Response: 327
Usage:
Query only
[:SOURce<hw>]:LIST:INDex
<Index>
Sets the list index in step mode (
LIST:MODE STEP
).
After the trigger signal the frequency and level settings of the selected index are pro-
cessed in List mode.
Parameters:
<Index>
integer
*RST:
0
Example:
LIST:SEL 'D:\user\list3'
selects
list3
for use in List mode.
FREQ:MODE LIST
activates List mode.
List3
is processed.
LIST:MODE STEP
selects manual, step-by-step processing of the list.
LIST:IND 5
the frequency/level value pair with index 5 is executed.
TRIG:LIST:SOUR SING
selects triggering by means of the single trigger. The list is exe-
cuted once.
SOUR:LIST:TRIG:EXEC
triggers the processing of the selected list.
Manual operation:
See
[:SOURce<hw>]:LIST:INDex:STARt
<Start>
Sets the start index of the index range which defines a subgroup of frequency/level
value pairs in the current list. Only the values in the set index range
(
:LIST:INDex:STARt ... :LIST:INDex:STOP
) are processed in List mode.
SOURce Subsystem
Summary of Contents for SMJ100A
