R&S SMJ100A, Operating Manual

Page: 166 / 874

Instrument Function
R&S
®
SMJ100A
150 Operating Manual 1403.7458.32 ─ 14
Changing the security password requires that you enter the old password, the new
password and that you confirm the new password.
To assign the password, press the "Accept" button. This action can not be undone!
Keep also in mind, that security settings are never reset, even if you perform a factory
preset.
► To access this dialog, press the SETUP or MENU key and select "Protection " >
"Security".
The "Security" dialog comprises the parameters for configuring the passwords, as
well as the security settings of the mass storage and the LAN services.
The settings in this dialog will not be assigned until you enter the Security Password
and confirm with the Accept button.
Change Security Password
Enables you to change and confirm the security password.
Old Password ← Change Security Password
Enters the currently used security password. The default password is '123456'.
Note: It is highly recommended to change the default security password before con-
necting the instrument to the network.
The security password is required when changing the status of the USB and LAN inter-
face.
New Password ← Change Security Password
Enters the new security password.
The security password may contain decimal characters only.
General Instrument Settings