Preparing for Use
R&S
®
SMJ100A
52
Operating Manual 1403.7458.32 ─ 14
3. Enter the user ID and password for the instrument (see also
4. Click "Connect".
When the connection has been set up, the instrument's screen appears on the
remote computer.
Disabled Direct Control
While remote access is active, the direct control of the instrument is disabled.
Remote access is indicated on the instrument by the logon screen of the operating sys-
tem. The logon screen identifies the accessing user.
For simultaneous remote access of several instruments from the same PC, a separate
Remote Desktop session must be opened for each instrument.
For detailed information about Remote Desktop and the connection refer to the Win-
dows Help.
Helpful settings for Remote Desktop
The following settings for the Remote Desktop connection can make working on the
remote PC more convenient.
1. When setting up the connection to the instrument, you can configure the connec-
tion settings in the "Remote Desktop Connection" dialog box.
Click the "Options >>" button.
The dialog box is expanded to display the configuration data.
2. Customize the settings:
●
On the "Experience" tab:
–
Select the appropriate connection to optimize the connection speed.
–
To improve the performance, you can deactivate options you do not require
under "Allow the following".
●
On the "Local Resources" tab:
–
If you need to access drives of the remote PC from the instrument (e.g. in
order to store settings or to copy files from the PC to the instrument), acti-
vate the "Disk drives" option. Windows Embedded Standard will then map
drives of the remote PC to the corresponding network drives. When a con-
nection is established, a warning is displayed on the PC indicating that the
drives are enabled for access from the instrument.
–
To use printers connected to the remote PC while accessing them from the
instrument, activate the "Printers" options. Do not change the remaining
settings.
●
On the "Display" tab:
–
Under "Remote desktop size", set the size of the R&S
SMJ window on the
desktop of the remote PC.
–
Activate the "Display the connection bar when in full screen mode" option.
Remote Access via an External Controller
Summary of Contents for SMJ100A
