R&S SMJ100A, Operating Manual

Page: 437 / 874

Instrument Function
R&S
®
SMJ100A
421 Operating Manual 1403.7458.32 ─ 14
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:STEP
on page 607
Phase Start
Sets the phase of the carrier marked by "Carrier Start".
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:PHASe[:STARt]
on page 607
Phase Step
Sets the step width that is used to increment the phase.
The resulting phase in the carrier table equals:
Phas n* PhaseStep
where n ranges from 0 to (Carrier Stop – Carrier Start)
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:POWer:STEP
on page 607
Delay Start
Sets the delay of the carrier marked by "Carrier Start".
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay[:STARt]
on page 605
Delay Step
Sets the step width that is used to increment the delay
The resulting delay in the carrier table equals:
Dela n* DelayStep
where n ranges from 0 to (Carrier Stop – Carrier Start).
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:DELay:STEP
on page 605
Input Waveform File
Calls the "File" menu for selecting the inputfile with the I/Q signal to be modulated onto
all carriers of the selected carrier range.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:FILE
on page 606
Apply Assistant Settings
Transfer the assistant settings to the carrier table.
Remote command:
[:SOURce<hw>]:BB:ARBitrary:MCARrier:EDIT:CARRier:EXECute
on page 605
Baseband Signal - Baseband Block