R&S SMJ100A, Operating Manual

Page: 447 / 874

Instrument Function
R&S
®
SMJ100A
431 Operating Manual 1403.7458.32 ─ 14
Trigger/Marker/Clock Settings
To access this dialog, select "Main Menu > Trigger/Marker".
The "Trigger In" section is where the trigger for the signal is set. Various parameters
will be provided for the settings, depending on which trigger source - internal or exter-
nal - is selected. The current status of signal generation ("Running" or "Stopped") is
indicated for all trigger modes.
The "Marker Mode" section is where the marker signals at the MARKER output con-
nectors are configured.
The "Marker Delay" section is where a marker signal delay can be defined, either with-
out restriction or restricted to the dynamic section, i.e., the section in which it is possi-
ble to make settings without restarting signal and marker generation.
The "Clock Settings" section is where the clock source is selected and - in the case of
an external source - the clock type.
The buttons in the last section lead to submenu for general trigger, clock and mapping
settings.
Baseband Signal - Baseband Block