R&S SMJ100A, Operating Manual

Page: 611 / 874

Remote Control Commands
R&S
®
SMJ100A
595 Operating Manual 1403.7458.32 ─ 14
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:FREQuency <Frequency>
Sets the frequency of the test signal.
Parameters:
<Frequency> float
Range:
100 to depends on hardware
Increment: 0.01
*RST:
1000
Example: SOURce:BB:ARBitrary:TSIGnal:RECTangle:FREQuency
100 kHz
sets the frequency of the test signal of 100 kHz.
Manual operation: See "Frequency (Rect Test Signal)" on page 392
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:OFFSet <Offset>
Sets the DC component.
Parameters:
<Offset> float
Range:
-1 to 1
Increment: 0.001
*RST:
0
Default unit: FS
Example: BB:ARB:TSIG:RECT:OFFS 0.5
sets the DC component
Manual operation: See "Offset DC (Rect Test Signal)" on page 393
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:RECTangle:SAMPles <Samples>
Sets the number of sample values required for the rectangular signal per period.
Parameters:
<Samples> integer
Range:
4 to 1000
*RST: 100
Example: BB:ARB:TSIG:RECT:SAMP 400
sets 400 samples per period
Manual operation: See "Samples per Period (Rect Test Signal)" on page 392
[:SOURce<hw>]:BB:ARBitrary:TSIGnal:SINE:FREQuency <Frequency>
Sets the frequency of the simple sinusoidal test signal. This signal is used as output via
the I channel. A sine wave of the same frequency but optionally phase-shifted is gener-
ated on the Q path (
ARB:TSIGnal:SINE:POFFset
).
SOURce Subsystem