R&S SMJ100A, Operating Manual

Page: 546 / 874

Remote Control Commands
R&S
®
SMJ100A
530 Operating Manual 1403.7458.32 ─ 14
:DISPlay:PSAVe:HOLDoff <HoldoffTimeMin>
Sets the waiting time for the screen-save mode of the display.
Parameters:
<HoldoffTimeMin> integer
Range:
1 to 60
*RST: 10
Default unit: minute
Example: DISP:PSAV:HOLD 8
sets the timeout of the screen saver to 8 minutes.
Manual operation: See "Wait Time" on page 144
:DISPlay:PSAVe[:STATe] <State>
Activates the screen-save mode of the display. If activated, the display including back-
light is completely switched off after the elapse of the wait time, provided no entries via
front panel, external mouse or external keyboard are made. To determine the wait
time, use command
:DISPlay:PSAVe:HOLDoff
.
This mode is recommended for protecting the display, especially if you operate the
instrument via remote control.
Parameters:
<State> 0 | 1 | OFF | ON
*RST:
0
Example: DISP:PSAV ON
activates screen saver mode.
Manual operation: See "Screen Saver Active" on page 143
:DISPlay:UPDate <Update>
Activates the refresh mode of the display.
Parameters:
<Update> 0 | 1 | OFF | ON
*RST:
1
Example: DISP:UPD ON
activates automatic update of the display at defined time inter-
vals.
7.10 FORMat Subsystem
The FORMat subsystem contains the commands which determine the format of the
data that the R&S
SMJ returns to the controller. This affects all query commands which
FORMat Subsystem