Instrument Function
R&S
®
SMJ100A
303
Operating Manual 1403.7458.32 ─ 14
"Differential"
Differential output at I
OUT and I
OUT
BAR or Q
OUT and
Q
OUT
BAR.
The analog I/Q signal components are output at I/Q OUT and I/Q
OUT BAR. A bias to set the operating point of DUT can be defined. In
addition an offset between inverting and non-inverting output can be
set to balance a difference of the best operating points.
"Single Ended" Single-ended output at I OUT and Q OUT.
A bias between I/Q OUT and ground can be defined (requires the
option R&S
SMJ-B16, Differential I/Q Output).
Remote command:
[:SOURce<hw>]:IQ:OUTPut[:ANALog]:TYPE
Mode
Selects the mode for setting the outputs - independent or together. The menu changes
depending on the selection here.
Impairment of Digital I/Q Signal and Noise Generator - AWGN/IMP Block
Summary of Contents for SMJ100A
