Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 616 / 726

64. Voice VLAN Commands
616

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To set the priority of the voice VLAN to be six:
64.4. config voice_vlan oui

Description
This command is used to configure the user-defined voice traffic's OUI. The OUI is used to
identify the voice traffic. There are a number of pre-defined OUIs. The user can further
define the user-defined OUIs if needed. The user-defined OUI cannot be the same as the
pre-defined OUI. The following are the pre-defined voice traffic's OUI:
OUI Vendor Mnemonic Name
00:E0:BB 3COM 3com
00:03:6B Cisco cisco
00:E0:75 Veritel veritel
00:D0:1E Pingtel pingtel
00:01:E3 Siemens siemens
00:60:B9 NEC/Philips nec&philips
00:0F:E2 Huawei-3COM huawei&3com
00:09:6E Avaya avaya
 Format
config voice_vlan oui [add | delete] <macaddr> <macmask> {description <desc 32>}

Parameters
Zxxx0:admin#config voice_vlan priority 6
Command: config voice_vlan priority 6
Success.
Zxxx0:admin#
add Specify to add a user-defined OUI of Voice device vendor.
delete Specify to delete a user-defined OUI of Voice device vendor.
<macaddr> Specify a user-defined OUI MAC address.
<macmask> Specify a user-defined OUI MAC address mask.
description (Optional) Specify a description for the user-defined OUI.
<desc 32> Specify a description for the user-defined OUI. The maximum length is 32
characters.