Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 319 / 726

36. LLDP Commands
319
36.12. config lldp_med ports
 Description
This command is used to enable or disable transmitting LLDP-MED TLVs. It effectively
disables LLDP-MED on a per-port basis by disabling transmission of TLV capabilities. In
this case, the remote table's objects in the LLDP-MED MIB corresponding to the
respective port will not be populated.

Format
config lldp_med ports [<portlist> | all] med_transmit_capabilities [all | {capabilities |
network_policy | inventory}(1)] state [enable | disable]
 Parameters

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To enable transmitting of all capabilities on ports 1 to 2:
<portlist>Specify a range of ports to be configured.
all Specify to set all ports in the system.
med_transit_capabilities
Select to send the LLDP-MED TLV capabilities specified.
all Select to send capabilities, network policy, and inventory.
capabilities
(Optional) Specify that the LLDP agent should transmit "LLDP-MED capabilities TLV." If a
user wants to transmit LLDP-MED PDU, this TLV type should be enabled. Otherwise, this
port cannot transmit LLDP-MED PDU.
network_policy
(Optional) Specify that the LLDP agent should transmit "LLDP-MED network policy TLV."
inventory
(Optional) Specify that the LLDP agent should transmit "LLDP-MED inventory TLV."
state Enable or disable the transmitting of LLDP-MED TLVs.
enable
Enable the transmitting of LLDP-MED TLVs.
disable Disable the transmitting of LLDP-MED TLVs.
Zxxx0:admin#config lldp_med ports 1-2 med_transmit_capabilities all state enable
Command: config lldp_med ports 1-2 med_transmit_capabilities all state enable
Success.
Zxxx0:admin#