Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 364 / 726

40. Mirror Commands
364

Restrictions
Only Administrator and Operator-level users can issue this command.

Example
To add mirroring target port 6 and the source ports 1 to 5 rx and tx packets:
40.3. config mirror group_id

Description
This command used to configure mirror group's parameters. It can configure mirror group's
target port, state and source ports. The mirror group target port can't be a member of all
mirror groups' source ports. Each mirror group's target port can be the same port. But each
mirror group's source ports can't overlap.

Format
config mirror group_id <value 1-4> {target_port <port> | [add | delete] source ports
<portlist> [rx | tx | both] | state [enable | disable]}

Parameters
Zxxx0:admin#config mirror port 6 add source ports 1-5 both
Command: config mirror port 6 add source ports 1-5 both
Success.
Zxxx0:admin#
<value 1-4>
Enter the mirror group ID used here. This value must be between 1 and 4.
target_port
(Optional) Specifies the port that will receive the packets duplicated at the mirror port.
<port>
Enter the target port number used here.
add (Optional) Specifies the mirror source ports to be add.
delete (Optional) Specifies the mirror source ports to be delete
source (Optional) Specifies the source ports used.
ports (Optional) Specifies the list of ports used as source ports.
<portlist>
Enter the list of ports to be used as the source ports here.
rx (Optional) Specifies that only the received packets on the mirror group source ports will
be mirrored to the mirror group target port.
tx (Optional) Specifies that only the sent packets on the mirror group source ports will be
mirrored to the mirror group target port.
both (Optional) Specifies that both the received and sent packets on the mirror group source
ports will be mirrored to the mirror group target port.