Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 650 / 726

67. 802.1X Commands
650

Dynamic VLAN using IEEE 802.1X
In a static VLAN, the destination VLAN is fixed for each port. Meanwhile, in a dynamic
VLAN, the destination VLAN is determined based on the client MAC address
information regardless of a port to be connected.
There are several ways to configure dynamic VLAN. One of them is to use IEEE 802.1X
RADIUS server information. If the client's VLAN information is registered in the
RADIUS server, the VLAN information is retrieved during authentication, allowing for
accessing the VLAN to which the client belongs from any port.
Figure 67-4 Dynamic VLAN
enable 802.1x
disable 802.1x
create 802.1x user <username 15>
delete 802.1x user <username 15>
show 802.1x user
config 802.1x auth_protocol [local | radius_eap]
show 802.1x {[auth_state | auth_configuration] ports {<portlist>}}
config 802.1x capability ports [<portlist> | all] [authenticator | none]
config 802.1x fwd_pdu ports [<portlist> | all] [enable | disable]
config 802.1x fwd_pdu system [enable | disable]
config 802.1x auth_parameter ports [<portlist> | all] [default | {direction [both | in] | port_control
[force_unauth | auto | force_auth] | quiet_period <sec 0-65535> | tx_period <sec 1-65535>
| supp_timeout <sec 1-65535> | server_timeout <sec 1-65535> | max_req <value 1-10> |
reauth_period <sec 1-65535> | max_users [<value 1-448> | no_limit] | enable_reauth [enable
| disable]}(1)]
config 802.1x authorization attributes radius [enable | disable]
config 802.1x init [port_based ports [<portlist> | all] | mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
config 802.1x max_users [<value 1-448> | no_limit]
config 802.1x reauth [port_based ports [<portlist> | all] |mac_based ports [<portlist> | all]
{mac_address <macaddr>}]
create 802.1x guest_vlan <vlan_name 32>
delete 802.1x guest_vlan <vlan_name 32>
config 802.1x guest_vlan ports [<portlist> | all] state [enable | disable]