Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 605 / 726

63. Utility Commands
605

Restrictions
None.

Example
To send ICMP echo message to "10.51.17.1" for 4 times:
63.17. ping6
 Description
This command is used to send Internet Control Message Protocol (ICMP) echo
messages to a remote IPv6 address. The remote IPv6 address will then "echo" or
return the message. This is used to confirm connectivity between the Switching Hub
and the remote device.

Format
ping6 <ipv6addr> {times <value 1-255> | size <value 1-6000> | timeout <sec 1-99> |
source_ip <ipv6addr>}
<domain_name 255>
Specifies the domain name of the host. This name can be up to 255 characters long.
times (Optional) Specify the number of individual ICMP echo messages to be sent.
<value 1-255>
Specify the number of individual ICMP echo messages to be sent. A value of 0 will
send an infinite ICMP echo messages. The maximum value is 255. The default is 0
timeout (Optional) Specify the time-out period while waiting for a response from the remote
device. A value of 1 to 99 seconds can be specified. The default is 1 second.
<sec 1-99>
Specify the time-out period while waiting for a response from the remote device. A
value of 1 to 99 seconds can be specified. The default is 1 second.
source_ip
Specifies the source IP address of the ping packets. If specified, the IP address will be
used as the packets' source IP address that ping send to remote host.
<ipaddr>
Enter the source IP addres used here.
Zxxx0:admin#ping 10.51.17.1 times 4
Command: ping 10.51.17.1 times 4
Reply from 10.51.17.1, time<10ms
Reply from 10.51.17.1, time<10ms
Reply from 10.51.17.1, time<10ms
Reply from 10.51.17.1, time<10ms
Ping Statistics for 10.51.17.1
Packets: Sent =4, Received =4, Lost =0
Zxxx0:admin#