Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 467 / 726

50. QoS Commands
467

Restrictions
None.

Example
To display the port bandwidth control table for port 1:
50.5. config scheduling
 Description
This command is used to configure the traffic scheduling mechanism for each CoS
queue.
 Format
config scheduling {ports [<portlist> | all]} <class_id 0-7> [strict | weight <value 1-127>]

Parameters
Zxxx0:admin#show per_queue bandwidth_control 1
Command: show per_queue bandwidth_control 1
Queue Bandwidth Control Table On Port: 1
Queue Min Rate(Kbit/sec) Max Rate(Kbit/sec)
0 No Limit No Limit
1 No Limit No Limit
2 64 1024
3 64 No Limit
4 No Limit No Limit
5 No Limit No Limit
6 No Limit No Limit
7 No Limit No Limit
Zxxx0:admin#
ports (Optional) Specify a range of ports to be configured.
<portlist>
Enter the list of ports here.
all Specifies that all the ports will be used.
<class_id 0-7>
Specifies the 8 hardware priority queues that the config scheduling command will apply
to. The eight hardware priority queues are identified by a number from 0 to 7 with the 0
queue being the lowest priority.
strict Specifies that the queue will operate in strict mode.