Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 296 / 726

35. Link Aggregation Commands
296
35.Link Aggregation Commands
Link aggregation is a technology to connect two Switching Hubs with
multiple ports and bundle them as one port. This provides path redundancy
and enhanced bandwidth.
You can select how to distribute communications to bundled ports
from several methods.
Figure 35-1 Link aggregation overview
To use the LACP protocol, which automatically configures and monitors
link aggregation, enable the use of LACP in this section and configure the
protocol settings by referring to "LACP Configuration Commands."
35.1. create link_aggregation group_id

Description
This command is used to create a link aggregation group.
 Format
create link_aggregation group_id <value 1-32> {type [lacp | static]}
create link_aggregation group_id <value 1-32> {type [lacp | static]}
delete link_aggregation group_id <value 1-32>
config link_aggregation group_id <value 1-32> {master_port <port> | ports <portlist> | state
[enable | disable]} (1)
config link_aggregation algorithm [mac_source | mac_destination | mac_source_dest | ip_source
| ip_destination | ip_source_dest | l4_src_port | l4_dest_port | l4_src_dest_port]
show link_aggregation {group_id <value 1-32> | algorithm}
ワヰヵユ ワヰヵユ