Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 305 / 726

36. LLDP Commands
305

Format
config lldp [message_tx_interval <sec 5-32768> | message_tx_hold_multiplier <int 2-
10> | tx_delay <sec 1-8192> | reinit_delay <sec 1-10>]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To change the packet transmission interval:
To change the multiplier value:
message_tx_interval
Specify the message TX interval between consecutive transmissions of LLDP
advertisements on any given port.
<sec 5-32768>
The range is from 5 to 32768 seconds. The default setting is 30 seconds.
message_tx_hold_multiplier
Specify the message TX hold multiplier.
<int 2-10>
Specify the range is from 2 to 10. The default setting is 4.
tx_delay Specify the TX delay time.
<sec 1-8192>
Specify the range is from 1 to 8192 seconds. The default setting is 2 seconds.
Note that txDelay should be less than or equal to 0.25 * msgTxInterval.
reinit_delay
Specify the reinit delay time.
<sec 1-10>
Specify the range is from 1 to 10 seconds. The default setting is 2 seconds.
Zxxx0:admin#config lldp message_tx_interval 30
Command: config lldp message_tx_interval 30
Success.
Zxxx0:admin#
Zxxx0:admin#config lldp message_tx_hold_multiplier 3
Command: config lldp message_tx_hold_multiplier 3
Success.
Zxxx0:admin#