Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 587 / 726

63. Utility Commands
587
63.2. download cfg_fromRCP
 Description
This command is used to download a configuration file from a Remote Copy Protocol
(RCP) server.
 Format
download cfg_fromRCP [{username <username>} {<ipaddr>} src_file <path_filename
64> | rcp: <string 128>] {[unit <unit_id 1-4> | all]} {dest_file <pathname>}

Parameters

Restrictions
Only Administrator-level users can issue this command.
username(Optional) Specify the remote user name on the RCP server.
<username>
Specify the remote user name on the RCP server.
<ipaddr>(Optional) Specify the IP address of the RCP server.
src_file Specify the path and file name of the Switching Hub configuration file on the RCP server.
The maximum length is 64.
<path_filename 64>
Specify the path and file name of the Switching Hub configuration file on the RCP
server. The maximum length is 64.
rcp: Syntax: rcp: username@ipaddr/directory/filename.
Example for full path: user_name@10.1.1.1/home/user_name/desxxxx.had;
Example for relative path: user_name@10.1.1.1./desxxxx.had.
Note: No spaces in the whole <string>.
<string 128>
Syntax: rcp: username@ipaddr/directory/filename.
Example for full path: user_name@10.1.1.1/home/user_name/desxxxx.had;
Example for relative path: user_name@10.1.1.1./desxxxx.had.
Example for omitted user name in RCP string: 10.1.1.1./desxxxx.had.
Note: No spaces in the whole <string>.
unit Specifies which unit on the stacking system. If it is not specified, it refers to the master
unit.
<unit_id 1-4>
Enter the unit ID used here. This value must be between 1 and 4.
all Specifies that all the units in the stacking system will be used.
dest_file (Optional) Specify the path and file name of the destination file on the device.
<pathname>
Specify the path and file name of the destination file.