Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 31 / 726

5. Basic Management Commands
31
5.4. config account
 Description
When the password information is not specified in the command, the system will prompt
the user to input the password interactively. For this case, the user can only input the plain
text password. If the password is present in the command, the user can select to input the
password in the plain text form or in the encrypted form. The encryption algorithm is based
on SHA-1.

Format
config account <username> {encrypt [plain_text | sha_1] <password>}
 Parameters

Restrictions
Only Administrator-level users can issue this command.

Example
To configure the user password of the "panasonic" account:
To configure the user password of the "administrator" account:
<username>
Specify the name of the account. The account must already be defined.
encrypt (Optional) Specify the encryption type, plain_text or sha_1.
plain_text
Specify the password in plain text form. For the plain text form, passwords must
have a minimum of 0 and a maximum of 15 characters. The password is case-
sensitive
sha_1 Specify the password in the SHA-1 encrypted form. For the encrypted form
password, the length is fixed to 35 bytes long. The password is case-sensitive.
<password>
Specify the password.
Zxxx0:admin#config account manager
Command: config account manager
Enter a old password:****
Enter a case-sensitive new password:****
Enter the new password again for confirmation:****
Success.
Zxxx0:admin#