Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 617 / 726

64. Voice VLAN Commands
617

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To add a user-defined OUI of a voice device:
64.5. config voice_vlan ports

Description
This command is used to enable or disable the voice VLAN function on ports or mode per
port.

Format
config voice_vlan ports [<portlist> | all] [state [enable | disable] | mode [auto{[tag |
untag]} | manual]]
 Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure voice VLAN ports 4 to 6 to enable:
Zxxx0:admin#config voice_vlan oui add 00-C0-8F-00-00-00 FF-FF-FF-00-00-00
Command: config voice_vlan oui add 00-C0-8F-00-00-00 FF-FF-FF-00-00-00
Success.
Zxxx0:admin#
<portlist>Specify a range of ports to set.
all Specify to set all ports.
state Specify the voice VLAN function state on ports. The default state is disabled.
enable
Specify to enable the voice VLAN function state on ports.
disable Specify to disable the voice VLAN function state on ports.
mode The voice VLAN mode. The default mode is auto.
auto
When the mode is auto, the port may become the voice VLAN member port by
auto-learning. If the MAC address of the received packet matches the
configured OUI, the port will be learned as dynamic member port. The dynamic
membership will be removed via the aging out mechanism.
manual When the mode is set to manual, the port needs to be manually added into or
removed from the voice VLAN by 802.1Q VLAN configuration command.