45. Network Monitoring Commands
432
45.19. config syslog source_ipif
Description
This command is used to force change the ipif information in syslogs. By default, syslogs
will carry the information of the ipif they belong to.
Format
config syslog source_ipif [<ipif_name 12> {<ipaddr> | <ipv6addr>} | none]
Parameters
Restrictions
Only Administrator and Operator-level users can issue this command.
Example
To configure the syslog source IP interface:
To clear the configured source IP interface for syslog:
<ipif_name 12>
Specify the IP interface name. If only this parameter is specified, the IPv4 address and the
smallest IPv6 address of ipif_name will be used as source IP addresses.
<ipaddr>(Optional) Specify the IP4 address.
<ipv6addr>
(Optional) Specify the IPv6 global address.
none
Specify to clear the configured source IP interface.
Zxxx0:admin#config syslog source_ipif Sysetm
Command: config syslog source_ipif System
Success.
Zxxx0:admin#
Zxxx0:admin#config syslog source_ipif none
Command: config syslog source_ipif none
Success.
Zxxx0:admin#
Summary of Contents for ZEQUO 2200
