Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 669 / 726

67. 802.1X Commands
669

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To delete a RADIUS server:
67.22. config radius

Description
This command is used to configure a RADIUS server.

Format
config radius <server_index 1-3> {ipaddress [<server_ip> | <ipv6addr>] | key <password
32> | auth_port [<udp_port_number 1-65535> | default] | acct_port
[<udp_port_number 1-65535> | default] | timeout [<sec 1-255> | default] | retransmit
[<int 1-20> | default]}(1)

Parameters
Zxxx0:admin#config radius delete 1
Command: config radius delete 1
Success.
Zxxx0:admin#
<server_index 1-3>
Specify the RADIUS server index.
ipaddress
Specify the IP address of the RADIUS server.
<server_ip>
Enter the RADIUS server IP address here.
<ipv6addr>
Enter the IPv6 address here.
key Specify the key pre-negotiated between the Switching Hub and the RADIUS server. It is
used to encrypt user's authentication data before being transmitted over the Internet.
The maximum length of the key is 32.
<passwd 32>
Specify the key pre-negotiated between the Switching Hub and the RADIUS server.
It is used to encrypt user's authentication data before being transmitted over the
Internet. The maximum length of the key is 32.