Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 502 / 726

53. SNMPv1/v2/v3 Commands
502
53.SNMPv1/v2/v3 Commands
SNMP (Simple Network Management Protocol) is a protocol to monitor and
manage network-connected devices via network. Target devices have a
management information database called MIB (Management Information
Base). SNMP monitors and controls them through access to their MIBs
using an external management manager.
In this chapter, you will configure the management settings for a SNMP
group (SNMP community) comprising the management manager and
management targets (agents).
SNMP has different versions such as v1/v2c/v3. This Switching Hub
supports all versions.
create snmp user <user_name 32> <groupname 32> {encrypted [by_password auth [sha
<auth_password 8-20>] priv [none | des <priv_password 8-16>] | by_key auth [sha <auth_key
40-40>] priv [none | des <priv_key 32-32>]]}
delete snmp user <user_name 32>
show snmp user
show snmp groups
create snmp view <view_name 32> <oid> view_type [included | excluded]
delete snmp view <view_name 32> [all | <oid>]
show snmp view {<view_name 32>}
create snmp community <community_string 32> view <view_name 32> [read_only | read_write]
delete snmp community <community_string 32>
show snmp community {<community_string 32>}
create snmp community_masking view <view_name 32> [read_only | read_write]
config snmp engineID <snmp_engineID 10-64>
show snmp engineID
create snmp group <groupname 32> [v1 | v2c | v3 [noauth_nopriv | auth_nopriv | auth_priv]]
{read_view <view_name 32> | write_view <view_name 32> | notify_view <view_name
32>}(1)
delete snmp group <groupname 32>
create snmp [host <ipaddr> | v6host <ipv6addr>] [v1 | v2c | v3 [noauth_nopriv | auth_nopriv |
auth_priv]] <auth_string 32>
delete snmp [host <ipaddr> | v6host <ipv6addr>]
show snmp v6host {<ipv6addr>}
show snmp host {<ipaddr>}
enable community_encryption
disable community_encryption
show community_encryption