Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 588 / 726

63. Utility Commands
588

Example
To download a configuration file from an RCP server:
63.3. download firmware_fromRCP
 Description
This command is used to download a firmware file from a Remote Copy Protocol
(RCP) server..
 Format
download firmware_fromRCP [{username <username>} {<ipaddr>} src_file
<path_filename 64> | rcp: <string 128>] {[unit <unit_id 1-4> | all]} {dest_file
<pathname>} {boot_up}

Parameters
Zxxx0:admin#download cfg_fromRCP username rcp_user 172.18.212.106 src_file /home/
runtime.cfg
Command: download cfg_fromRCP username rcp_user 172.18.212.106 src_file /home/
runtime.cfg
Connecting to server................... Done.
Download configuration................. Done.
Zxxx0:admin#
username(Optional) Specify the remote user name on the RCP server.
<username>
Specify the remote user name on the RCP server.
<ipaddr>(Optional) Specify the IP address of the RCP server.
src_file Specify the path name on the RCP server or local. Note: If a user specifies the relative file
path, the path search strategy depends on the server system.
<path_filename 64>
Specify the path name on the RCP server or local. Note: If a user specifies the
relative file path, the path search strategy depends on the server system.