Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 604 / 726

63. Utility Commands
604
63.15. show rcp server
 Description
This command is used to display Remote Copy Protocol (RCP) global server
information.
 Format
show rcp server

Parameters
None.

Restrictions
Only Administrator-level users can issue this command.
 Example
To display RCP global server information:
63.16. ping

Description
This command is used to send Internet Control Message Protocol (ICMP) echo
messages to a remote IP address. The remote IP address will then "echo" or return the
message. This is used to confirm connectivity between the Switching Hub and the
remote device.

Format
ping [<ipaddr> | <domain_name 255>] {times <value 1-255> | timeout <sec 1-99> |
source_ip <ipaddr>}
 Parameters
Zxxx0:admin#show rcp server
Command: show rcp server
RCP Server Address :
RCP Server Username : travel
Zxxx0:admin#
<ipaddr>Specify the IP address of the host.