Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 218 / 726

26. Gratuitous ARP Commands
218

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
 Example
To disable gratuitous ARP, the trap, and the log state:
26.3. config gratuitous_arp learning

Description
This command is used to enable or disable learning of ARP entries in the ARP cache
based on the received gratuitous ARP packets.

Format
config gratuitous_arp learning [enable | disable]

Parameters

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To enable learning of ARP entries in the ARP cache based on the received gratuitous
ARP packets:
ipif (Optional) The interface name of the L3 interface.
<ipif_name 12>
Specify the name of the interface. The maximum length is 12 characters.
trap Specify trap. The trap is disabled by default.
log Specify log. The even log is enabled by default.
Zxxx0:admin#disable gratuitous_arp ipif System trap log
Command: disable gratuitous_arp ipif System trap log
Success.
Zxxx0:admin#
enable Enable learning of ARP entries based on the received gratuitous ARP packets.
disable Disable learning of ARP entries based on the received gratuitous ARP packets.