Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 362 / 726

40. Mirror Commands
362
40.Mirror Commands
The commands are used to mirror (copy) transmit and receive packets on a
specified port to other port and monitor packet contents. You can configure the
settings, such as mirroring of all transmit and receive packets by setting multiple
ports to a mirror group or mirroring of only transmit or receive packets.
Figure 40-1 Mirroring overview
40.1. create mirror group_id

Description
This command used to create a mirror group. If the mirror group has existed, do
nothing and return success.
 Format
create mirror group_id <value 1-4>
create mirror group_id <value 1-4>
config mirror port <port> {[add | delete] source ports <portlist> [rx | tx | both]}
config mirror group_id <value 1-4> {target_port <port> | [add | delete] source ports <portlist> [rx
| tx | both] | state [enable | disable]}(1)
delete mirror group_id <value 1-4>
enable mirror
disable mirror
show mirror {group_id <value 1-4>}