Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 623 / 726

64. Voice VLAN Commands
623
64.12. show voice_vlan voice_device

Description
This command is used to show voice devices that are connected to the ports. The start
time is the time when the device is detected on this port and the activate time is the
latest time when the device sends the traffic.
 Format
show voice_vlan voice_device {ports <portlist>}

Parameters
If no parameter is specified, the system will display the connected Voice
device of all ports.

Restrictions
None.

Example
To display voice VLAN device ports 1 to 2:
Zxxx0:admin#show voice_vlan ports 1-3
Command: show voice_vlan ports 1-3
Ports Status Mode
----- --------- --------
1 Disabled Auto
2 Disabled Auto
3 Disabled Auto
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to display.
Zxxx0:admin#show voice_vlan voice_device ports 1-2
Command: show voice_vlan voice_device ports 1-2
Ports Voice Device Start Time Last Active Time
----- ----------------- ---------------- -----------------
Total Entries : 0
Zxxx0:admin#
ワヰヵユ ワヰヵユ