Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 475 / 726

50. QoS Commands
475

Restrictions
Only Administrator, Operator and Power-User level users can issue this command.

Example
To configure an 802.1p default priority settings of 5 on all Switch ports:
50.12. show 802.1p default_priority

Description
This command is used to display the current default priority settings on the Switching
Hub. The default priority can also be assigned by the RADIUS server through the
authentication process. Authentication with the RADIUS server can be either per port
or per user. For per port authentication, the priority assigned by the RADIUS server
will be the default priority of the effective port. For per user authentication, the
priority assigned by RADIUS will not be the effective port default priority, as the will
priority associated with MAC address will be assigned. Note that only devices
supporting MAC-based VLANs can provide per user authentication.

Format
show 802.1p default_priority {<portlist>}
 Parameters
If no parameter is specified, the system will display all ports with 802.1p
default priority.

Restrictions
None.
 Example
To display 802.1p default priority for ports 1 to 4:
Zxxx0:admin#config 802.1p default_priority all 5
Command: config 802.1p default_priority all 5
Success.
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to be displayed.
ワヰヵユ ワヰヵユ