Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 224 / 726

27. IGMP Snooping Commands
224
27.1. config igmp_snooping

Description
This command is used to configure IGMP snooping on the Switching Hub.

Format
config igmp_snooping [vlan_name <vlan_name 32> | vlanid <vlanid_list> | all] {state
[enable | disable] | fast_leave [enable | disable] | proxy_reporting {state [enable |
disable] | source_ip <ipaddr>}(1)}
 Parameters
config igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr> [add |
delete] <portlist>
delete igmp_snooping static_group [vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>
show igmp_snooping static_group {[vlan <vlan_name 32> | vlanid <vlanid_list>] <ipaddr>}
show igmp_snooping statistic counter [vlan <vlan_name 32> | vlanid <vlanid_list> | ports
<portlist>]
clear igmp_snooping statistics counter
show igmp_snooping forwarding {[vlan <vlan_name 32> | vlanid <vlanid_list>]}
show router_ports [vlan <vlan_name 32> | vlanid <vlanid_list> | all] {[static | dynamic |
forbidden]}
config igmp_snooping unknow_data_learning [all | vlan_name <vlan_name 32> | vlanid
<vlanid_list>] {state [enable | disable] | aged_out [enable | disable] | expiry_time <sec 1-
65535>}
config igmp_snooping unknow_data_learning max_learned_entry <value 1-1024>
clear igmp_snooping data_learning_group [all | [vlan_name <vlan_name 32> | vlanid <vlanid_list>]
[<ipaddr> | all]]
vlan_name
Specify the name of the VLAN for which IGMP snooping is to be configured.
<vlan_name 32>
Specify the VLAN name. The maximum length is 32 characters.
vlanid Specify the VLAN ID list.
<vlanid_list>
Specify the VLAN ID list.
all Specify to configure all VLANs.
state Enable or disable IGMP snooping for the chosen VLAN.
enable
Enable IGMP snooping for the chosen VLAN.
disable
Disable IGMP snooping for the chosen VLAN.