Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 194 / 726

23. FDB Commands
194

Parameters
If no parameter is specified, all multicast FDB entries will be displayed.

Restrictions
None.
 Example
To display multicast MAC address table:
23.10. show fdb
 Description
This command is used to display the current unicast MAC address forwarding
database.
 Format
show fdb {[port <port> | vlan <vlan_name 32> | vlanid <vidlist> | mac_address
<macaddr> | static | aging_time | security]}
vlan (Optional) Specify the name of the VLAN on which the MAC address resides.
<vlan_name 32>
The maximum length is 32 characters.
vlanid (Optional) Specifies the VLAN ID on which the MAC address resides.
<vidlist>
Enter the VLAN ID used here.
mac_address
(Optional) Specify a MAC address, for which FDB entries will be displayed.
<macaddr>
Specify a MAC address, for which FDB entries will be displayed.
Zxxx0:admin#show multicast_fdb
Command: show multicast_fdb
VLAN Name : default
MAC Address : 01-00-00-00-01-01
Egress Ports : 1-5,26
Mode : Static
Total Entries : 1
Zxxx0:admin#
ワヰヵユ ワヰヵユ