Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 201 / 726

24. File System Management Commands
201

Parameters
 Restrictions
None.

Example
To list a directory:
To list a system directory:
unit Specifies the unit ID in the stacking system. If not specified, it refers to the master unit.
<unit_id>
Enter the unit ID value here.
<drive_id>
Specifies the drive ID. If not specified, it refers to the current drive.
<pathname>
(Optional) Specify the directory to be listed. The path name can be specified either as a
full path name or partial name. For a partial path name, it indicates the file is in the
current directory. The drive ID also included in this parameter, for example: d:/config/
bootup.cfg.
Zxxx0:admin#dir
Command: dir
Directory of c:/
Idx Info Attr Size Update Time Name
--- ------- ---- -------- -------------------- ----
1 RUN(*) -rw- 4796564 2000/01/22 03:52:03 runtime.rom
2 CFG(*) -rw- 24120 2000/01/22 23:22:58 config.cfg
3 CFG(b) -rw- 24120 2000/01/23 06:59:39 1
4 d--- 2000/01/23 22:52:50 system
30608 KB total (25700 KB free)
(*) -with boot up info (b) -with backup info
Zxxx0:admin#
Zxxx0:admin#dir c:/system
Command: dir c:/system
System reserved directory. Used space 89KB.
Zxxx0:admin#