Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 441 / 726

46. Packet Storm Commands
441
46.5. show traffic control
 Description
This command is used to display current traffic control settings.

Format
show traffic control {<portlist>}

Parameters
If no parameter is specified, the system will display all port packet storm
control configurations.

Restrictions
None.

Example
To display the packet storm control setting for ports 1 to 3:
Zxxx0:admin#config traffic trap both
Command: config traffic trap both
Success.
Zxxx0:admin#
<portlist>(Optional) Specify a range of ports to be shown.
Zxxx0:admin#show traffic control 1-3
Command: show traffic control 1-3
Traffic Control Trap : [None]
Traffic Control Log : Enabled
Traffic Control Auto Recover Time: 0 Minutes
Port Thres Broadcast Multicast Unicast Action Count Time Shutdown
hold Storm Storm Storm down Interval Forever
---- ------ --------- --------- -------- -------- -------- -------- --------
1 640 Enabled Disabled Disabled shutdown 0 10
2 640 Enabled Disabled Disabled shutdown 0 10
3 640 Enabled Disabled Disabled shutdown 0 10
Zxxx0:admin#
ワヰヵユ ワヰヵユ