41. MLD Snooping Commands
381
Restrictions
Only Administrator, Operator and Power-User level users can issue this command.
Example
To configure the MLD snooping querier:
41.11. config mld_snooping mrouter_ports
Description
This command allows users to designate a range of ports as being connected to multicast-
enabled routers. This will ensure that all packets with such a router as its destination will
reach the multicast-enabled router, regardless of protocol.
Format
config mld_snooping mrouter_ports [vlan <vlan_name 32> | vlanid <vlanid_list>] [add |
delete] <portlist>
Parameters
version Specify the version of MLD packet that will be sent by this port. If a MLD packet received
by the interface has a version higher than the specified version, this packet will be
forward from router ports or VLAN flooding.
<value 1-2>
Specify the values between 1 and 2.
Zxxx0:admin#config mld_snooping querier vlan_name default query_interval 125 state
enable
Command: config mld_snooping querier vlan_name default query_interval 125 state
enable
Success.
Zxxx0:admin#
vlan
Specify the name of the VLAN on which the router port resides.
<vlan_name 32>
Specify the name of the VLAN on which the router port resides. The maximum
length is 32 characters.
vlanid
Specify the ID of the VLAN on which the router port resides.
<vlanid_list>
Specify the VLAN ID list.
add
Specify to add router ports.
delete
Specify to delete router ports.
<portlist>Specify a range of ports to be configured.
Summary of Contents for ZEQUO 2200
