Panasonic ZEQUO 2200, Operating Instructions Manual

Page: 498 / 726

52. RSPAN Commands
498
52.5. config rspan vlan
 Description
This command is used by the source Switching Hub to configure the source setting for the
RSPAN VLAN. The redirect command is used by the intermediate or last Switching Hub to
configure the output port of the RSPAN VLAN packets, and makes sure that the RSPAN
VLAN packets can egress to the redirect ports. In addition, the VLAN setting must be
correctly configured to make the RSPAN VLAN work correctly. That is, for the intermediate
Switching Hub, the redirect port must be a tagged member port of the RSPAN VLAN. For
the last Switching Hub, the redirect port must be either a tagged member port or an
untagged member port of the RSPAN VLAN based on the users' requirements. If untagged
membership is specified, the RSPAN VLAN tag will be removed. The redirect function will
only work when RSPAN is enabled. Multiple RSPAN VLANs can be configured with the
redirect setting at the same time.
A RSPAN VLAN can be configured with the source setting and the redirect setting at the
same time.

Format
config rspan vlan [vlan_name <vlan_name> | vlan_id <vlanid 1-4094>] [redirect [add |
delete] ports <portlist> | source {[mirror_group_id <value 1-4> | [add | delete] ports
<portlist> [rx | tx | both]]}]

Parameters
Zxxx0:admin#delete rspan vlan vlan_id 3
Command: delete rspan vlan vlan_id 3
Success.
Zxxx0:admin#
vlan_name
Specify the RSPAN VLAN by VLAN name.
<vlan_name>
Specify the VLAN name.
vlan_id Specify the RSPAN VLAN by VLAN ID.
<vlanid 1-4094>
Specify the VLAN ID between 1 and 4094.
redirect Specify output port list for the RSPAN VLAN packets. If the redirect port is a Link
Aggregation port, the Link Aggregation behavior will apply to the RSPAN packets.
add
Specify to add the redirect port.
deleteSpecify to delete the redirect port.
ports Specify the output port list to add to or delete from the RSPAN packets.
<portlist>
Specify a range of ports to be configured.